Ceramics SMD UV LED SMCC395-1100

High Power type Top LED

SMCC395-1100 is an InGaN LED mounted on ceramic package with copper heat sink and is covered with silicone resin. On forward bias, it emits a band of 395nm. It is 70mW typical of output power and ±60° of viewing half angle.

Specifications
Product Name	Ceramics SMD UV LED
Spec. No.	SMCC395-1100
Chip
Chip Material	InGaAs
Chip Dimension	1000um*1000um
Peak Wavelength	395nm typ.
Package
Type	Ceramic with Heatsink
Resin Material	Silicone Resin

Outer dimension (Unit: mm)

Absolute Maximum Ratings

Item	Symbol	Maximum Rated Value	Unit	Ambient Temperature
Power Dissipation	PD	1250	mW	Ta=25°C
Forward Current	IF	350	mA	Ta=25°C
Pulse Forward Current	IFP	700	mA	Ta=25°C
Reverse Voltage	VR	10	V	Ta=25°C
Operating Temperature	TOPR	-30 ~ +85	°C
Storage Temperature	TSTG	-30 ~ +100	°C
Soldering Temperature	TSOL	265	°C

‡Pulse Forward Current condition: Duty=1% and Pulse Width=10us.
‡Soldering condition: Soldering condition must be completed within 3 seconds at 250°C

Electro-Optical Characteristics [Ta=25°C]

Item	Symbol	Condition	Typical	Maximum	Unit
Forward Voltage	VF	IF=200mA	3.4	4.0	V
Pulsed Forward Voltage	VF	IFP=0.5mA	3.8	4.5	V
Reverse Current IR	IR	VR=5V		10	uA
Total Radiated Power	PO	IF=200mA	70		mW
Peak Wavelength	P	IF=50mA	395		nm
Half Width		IF=50mA	14		nm
Viewing Half Angle		IF=50mA	±60		deg.
Rise Time	tr	IF=50mA	200		ns
Fall Time	tf	IF=50mA	150		ns

‡Total Radiated Power is measured by Photodyne #500
‡Brightness is measured by Tektronix J-6512.