Description
对不起，此内容只适用于English。 For the sake of viewer convenience, the content is shown below in the alternative language. You may click the link to switch the active language.
The LS-300RTR screen printer by New Long offers the following :
- We are in an age of roll to roll
- This full automatic printer enables continuous pattern printing by rolled-up web sheet (polyester film, metal foil, ceramic sheet) and cycle operation
- This printing system is appropriate for printing conductive circuit boards for connectors, multi-layer capacitor, etc..
|
| LS-300RTR Main Features |
- At the tape carrier, the tape is fixed on the suction roller by vacuum and accurate pitch advance can be performed by the servo motor drive.
- Printing table is adaptable to thin sheet (green sheet).
- Drying furnace is hot-air circulating type and enable to use IR heater together.
|
| LS-300RTR Specifications |
Printer
- Printing area Max 330×330 mm
- Treatment ability cycle time 5.0 sec
Unreel and reel equipment
- Loader
Unreel equipment edge control
Continuous paper unreel equipment pitch advance suction roller
- Unloader
Continuous paper reel equipment tension controller
Reel equipment edge control
- Selected materials : PET film, green sheet
- Film dimensions width : 200~400 mm
- Roll dimensions
Roll outward Max 500 mm Internal diameter of roll core Phi 76.2 mm
- Roll weight : Max 100 kg
Drying furnace
Temperature Usually 100 degree centigrade Max 150 degree centigrade
Whole
- Power requirement AC200V75 KW
- Air pressure 0.5 MPa20 L/minute(ANR)
- Machine’s weight about 3500 kg
|
Tech-led.com 
